12 Operating the unit
Renfert
22 / 28
Easyclean MD
12.8 Save programmes
You can save up to 4 programmes.
Display in Save mode
Display in Programme mode
1
2
3
1
2
4
To save the currently set programme, use the
plus/minus buttons to select a programme number
from 1 to 4.
In Normal mode the settings were made in the preset order. Switch on the unit [
19] These settings
can be saved as a programme.
Important
The auto-degas and temperature-controlled start modes can only be saved separately as in-
dividual programmes.
Hold down the
Mode
button (
1
) for >4 seconds until the display shows all 4 pro-
gramme numbers (
3
) and programme number 1 flashes. Now, press one of the
Plus/
Minus
buttons repeatedly until the programme number under which you wish to save
your settings flashes. Press the
Mode
button (
1
) again briefly to confirm saving the
programme. The saved programme number (
4
) will be shown on the display.
12.9 Start a saved ultrasonic cleaning programme
At least one programme from a possible four programme numbers has been saved.
The unit is in Programme mode. The last-used programme number is shown on the display.
The unit is in Normal mode. No programme number is shown on the display.
If necessary, switch between Normal mode and Programme mode. See
Hold down the
Mode
button until a programme number is shown on the display. The
last-used programme number is always shown, e.g. programme number 1.
Press one of the
Plus/minus
buttons to select a programme.
Press the
Start/stop
button to start the displayed programme.
