Renesas S3A1, User Manual

Page: 38 / 44

Target Board Kit S3A1 (TB-S3A1) Mechanical Drawing
R12UM0022EU0100 Rev.1.00 Page 34 of 36
Feb 6, 2018
Table 18 Target board physical characteristics and locations
Parameter Value Units
Target Board Envelope Height 130 mm
Target Board Envelope Width 80 mm
Target Board Envelope Thickness, including solder
mask, not including overlay printing
11 mm
Target Board assembled weight (estimated) 65 grams
Target Board shipping weight TBD grams
Target Board PCB Height 125 mm
Target Board PCB Width 80 mm
Target Board PCB Thickness, including solder
mask, not including overlay printing 1.65 mm
PCB corner rounding radius 2.54 mm
Mounting holes diameter 3.175 mm
Mounting Hole Upper Left (center) (3.5,121.5) mm
Mounting Hole Lower Left (center) (3.5,3.5) mm
Mounting Hole Upper Right (center) (76.5,121.5) mm
Mounting Hole Lower Right (center) (76.5,3.5) mm
J1 (Upper Left pin header, locate pin 1) (6.98,113.8) mm
J2 (Upper Right pin header, locate pin 1) (70.48,113.8) mm
J3 (Lower Left pin header, locate pin 1) (9.52,60.46) mm
J4 (Lower Right pin header, locate pin 1) (67.94,60.46) mm
TP1 (3V3, center) (36.19,2.215) mm
TP2 (GND, center) (43.81,2.215) mm
TP3 (5V, center) (15.235,122.865) mm
TP4 (GND, center) (10.155,122.865) mm
PMOD A (12-pin Female right-angle, locate pin 1) (23.49,8.39) mm
PMOD B (6-pin Female right-angle, locate pin 1) (69.21,5.85) mm
Notes:
•
Envelope size is the enveloping box inner dimensions for the assembled Target Board with pin headers, USB micro-B
connectors, and PMOD connectors installed.
•
Position is shown as (#,#), where the first number is distance from the left Target Board edge and the second number
is distance from the lower Target Board edge (board viewed with “Renesas” oriented for normal viewing), board
viewed from its top surface.