RTE0T00020KCAA0000J
User's Manual
R20UT5065EJ0100 Rev.1.00
Page 7 of 8
Dec 2021
7. Warranty
This product comes with a one-year warranty after purchase.
(1) Should the product break down or be damaged while you’re using it under normal condition based on its
user’s manual, it will be replaced free of cost.
(2) However, if the following failure or damage occurs to the product under warranty, the product will be
replaced at cost.
a) Failure or damage attributable to the misuse or abuse of the product or its use under other abnormal
conditions.
b) Failure or damage attributable to improper handling of the product after purchase, such as dropping of
the product when it is transported or moved.
c) Failure or damage to the product caused by other pieces of equipment connected to it.
d) Failure or damage attributable to fire, earthquakes, thunderbolts, floods, or other natural disasters or
abnormal voltages, etc.
e) Failure or damage attributable to modifications, repairs, adjustments, or other acts made to the product
by other than Renesas Electronics Corporation.
(3) This product is accessories product. We cannot accept any request for repair. Please forgive the request
for repair.
Precautions
This product is only intended for use in a laboratory environment under ambient temperature and humidity
conditions. A safe separation distance should be used between this and any sensitive equipment. Its use outside the
laboratory, classroom, study area or similar such area invalidates conformity with the protection requirements of
the Electromagnetic Compatibility Directive and could lead to prosecution.
The product generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by turning the
equipment off or on, you are encouraged to try to correct the interference by one or more of the following
measures;
• ensure attached cables do not lie across the equipment
• reorient the receiving antenna
• increase the distance between the equipment and the receiver
• connect the equipment into an outlet on a circuit different from that which the receiver is connected
• power down the equipment when not is use
• consult the dealer or an experienced radio/TV technician for help
NOTE: It is recommended that wherever possible shielded interface cables are used.
The product is potentially susceptible to certain EMC phenomena. To mitigate against them it is recommended that
the following measures be undertaken;
• The user is advised that mobile phones should not be used within 10m of the product when in use.
• The user is advised to take ESD precautions when handling the equipment.
This product does not represent an ideal reference design for an end product and does not fulfil the regulatory
standards for an end product.
