RSSHEUM0003 - 0101
Rev.1.00
Page 41
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
5. Using the Platform
5.1 Platform emulation and debugging
In this part, the configuration of the platform emulation and debugging is introduced. Below figure
shows system emulation environment with Renesas Hew and E8 debugger. For detail introduction,
please refer to Renesas HEW and E8 debugger user manuals.
E8
(97 x 65 x
21mm)
PC
(Windows98SE/ME/2000/XP)
Install
Tiny or SLP
HEW
Below picture shows the platform debugging with host PC and Renesas E8 debugger.
Please note
that, in debugging mode, do not mount “K1” (Relay) onto the board and also do not short Pin
3 and Pin 4 of “K1” on the board, because if Pin 3 and Pin 4 of “K1” shorted, system 5V is
floating on 220V AC, which will damage E8 debugger and host PC.
Tel: (86-21) 6888-0556 Fax: (86-21) 6888-0559 Zip: 200120
