RSSHEUM0003 - 0101
Rev.1.00
Page 33
Renesas System Solution (Beijing) Co., Ltd, Shanghai Branch
Unit 207 AZIA Center, No.1233 Lujiazui Ring Road, Pudong District, Shanghai, China
3.2.4 Wash process
Wash process runs different type of motor cycles according to user selected washing programs. This
part introduces wash process in relative program. For details, please refer to the program tables.
During wash running, if lid is open, platform will alarm and run the error processing program.
a), In “ Standard ” program, wash process runs with below rules:
If “ soak ” process selected, wash process starts the main stream washing motor cycle (motor
cycling time use wash set time subtracting 30 seconds) and then runs 30 seconds balance
washing motor cycle.
If full automatic program enabled, the wash process runs as following procedure: Weight
detection
Texture detection
Inlet for water drop
Wash for set time
Balance for 30
seconds. Especially, as we did not enable the weight and texture detection function in s/w, the
platform will not distinguish whether or not the full automatic program is enabled.
If the full automatic program not enabled, wash process starts the main stream washing motor
cycle (motor cycling time use wash set time subtracting 30 seconds) and then runs 30 seconds
balance washing motor cycle.
b), In “ Memo ”, “ Strong ” and “ Soft ” program, after inlet to user setting water level, wash process
starts the main stream washing motor cycle (motor cycling time use wash set time subtracting 30
seconds) and then runs 30 seconds balance washing motor cycle.
c), In “ Wool ” and “ Silk ” program, after inlet to user setting water level, wash process starts the
main stream washing motor cycle (motor cycling time use wash set time subtracting 30 seconds) and
then runs 30 seconds balance washing motor cycle.
3.2.5 Rinse process
Rinse process has two types, one is rinse with water inlet to user setting level, and the other is rinse-
spin type. For details, please refer to the program tables. During rinse running, if lid is open,
platform will alarm and run the error processing program.
a), Rinse with water inlet to user setting water level:
After inlet to user setting water level, wash process starts the main stream washing motor cycle
(motor cycling time use wash set time subtracting 30 seconds) and then runs 30 seconds
balance washing motor cycle.
Tel: (86-21) 6888-0556 Fax: (86-21) 6888-0559 Zip: 200120
