background image

 

User's  Manual 

R20UT2220EJ0200    Rev.2.00 

 

Page 1 of 8   

Mar 05, 2014 

 

R0E5563NEDMB00 

Debugging MCU Board for 144-pin 0.5mm-pitch LQFP 

of the RX63N and RX631 Groups 

1.  Overview 

The debugging MCU board R0E5563NEDMB00 (hereafter referred to as “this product”) is for MCUs of the RX63N 
and RX631 groups in the PLQP0144KA-A package.   

With the E20 emulator, the emulator occupies some user port pins for controlling the emulator and output of trace 
information. These user port pins must be connected with a 38-pin connector installed on the user system.   

With this product, however, all user port pins are available for the user system. In addition, you do not need to install a 
38-pin connector on the user system. 

Figure 1 shows the configuration of a system that includes this product and the E20. 

Be sure to read section 7, Notes on Usage, before using this product. 

Debugging MCU board

(this product)

YQPACK

(provided with this 

product)

NQPACK

(provided with this product)

E20 emulator

User system

38-pin connector

Host computer

USB interface cable

 

Figure 1   System Configuration  

2.  Package Components 

The package of this product consists of the following items. Check that you have all of the components when you 
unpack the box. 

Table 1    Package Components 
Component 

Quantity  Remarks 

Debugging MCU board common part 
(R0E5563NEVKZ00) 

For the dimensions, refer to section 6, Dimensions of This Product. 

Converter board (R0E55630EPFK00) 

For the dimensions, refer to section 6, Dimensions of This Product. 

YQPACK144SD   
(from Tokyo Eletech Corporation) 

Connector to be placed between this product and the NQPACK. 

NQPACK144SD-ND   
(from Tokyo Eletech Corporation) 

IC socket for mounting on the user system 

YQ-GUIDE-S1   
(from Tokyo Eletech Corporation) 

Screws for fastening the YQPACK to the NQPACK. 

Cautions in handling

 

Cautions when handling the products of Tokyo Eletech Corporation

 

User’s Manual (English and Japanese)  1 for each  This manual (English) 

Note:   NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, 

CSPLUG/W, and LSPACK are trademarks of Tokyo Eletech Corporation.

 

R20UT2220EJ0200 

Rev.2.00 

Mar 05, 2014 

Summary of Contents for R0E5563NEDMB00









Reviews: