13
Operations
Display Message
11. Enter Y (RET) to allow the
diagnostic program file
DIAG.SYS to be loaded. Then
enter the parallel transfer command
to load DIAG.SYS in the current
directory on the PC to the emulator
flash memory.
LOAD DIAGNOSTIC FILE OK (Y/N) ?
Y (RET)
INPUT COMMAND :
#B:A:\DIAG.SYS (RET)
:COMPLETED
12. Enter DIR (RET) to check whether
the necessary files have been
loaded.
FM>
DIR (RET)
<FILE ID> <STATUS>
SYS OK
CONF OK
LAN NO
FIRM OK
TRON NO
DIAG OK
INI OK
MON OK
13. Enter Q (RET) to terminate the
flash memory management tool.
FM>
Q (RET)
START E8000
S:START E8000
F:FLASH MEMORY TOOL
L:SET LAN PARAMETER
T:START DIAGNOSTIC TEST
(S/F/L/T) ? _
14. Installation is completed.
