8
3.3 Operation Flowchart
Figure 3.1 shows the diagnostic program operation flowchart.
START
Load diagnostic
program
Test system
configuration
Specify test
conditions
Initiate diagnostic
program
TEST01
TEST25
END
E8000 emulator only
(E8000 ONLY or E8000 + EVCHIP)
E8000 + FIXED USER
The user cannot perform this test.
to
Figure 3.1 Diagnostic Program Operation Flowchart
Note: TEST06 is executed when the optional LAN board test is specified.
TEST07 is executed when the P1284 interface test is specified.
TEST08 is executed when the serial interface test is specified.
TEST12 is executed when the operation tests are specified.
TEST16 to TEST25 are not executed when the E8000 ONLY test is selected.
