background image

III 

 

State Law:  

     Some states do not allow the exclusion or limitation of implied warranties or liability for 
incidental or consequential damages, so the above limitation or exclusion may not apply to you.  
This warranty gives you specific legal rights, and you may have other rights which may vary from 
state to state. 

The Warranty is Void in the Following Cases:  

     Renesas shall have no liability or legal responsibility for any problems caused by misuse, 
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the user 
system interface cable without Renesas’ prior written consent or any problems caused by the user 
system.   

All Rights Reserved:  

     This user's manual and user system interface cable are copyrighted and all rights are reserved 
by Renesas.  No part of this user's manual, all or part, may be reproduced or duplicated in any 
form, in hard-copy or machine-readable form, by any means available without Renesas’ prior 
written consent. 

Other Important Things to Keep in Mind:  

1.  Circuitry and other examples described herein are meant merely to indicate the characteristics 

and performance of Renesas’ semiconductor products. Renesas assumes no responsibility for 
any intellectual property claims or other problems that may result from applications based on 
the examples described herein. 

2.  No license is granted by implication or otherwise under any patents or other rights of any third 

party or Renesas.  

Figures:  

     Some figures in this user's manual may show items different from your actual system. 

Limited Anticipation of Danger:  

     Renesas cannot anticipate every possible circumstance that might involve a potential hazard.  
The warnings in this user's manual and on the user system interface cable are therefore not all 
inclusive.  Therefore, you must use the user system interface cable safely at your own risk. 

Summary of Contents for H8S/2633





























Reviews: