M3062PT3-RPD-E User’s Manual
3. Usage (How to Use the Emulator Debugger)
REJ10J0040-0600 Rev.6.00 July 01, 2006
Page 61 of 104
(2) Software break
1) Setting the software break point
Execution setup procedure with software break:
(1)
By double-clicking the break point setting line on the software
break point setting column in the editor (source) window, the
break point can be set up and released. (In this case, the red
circle is displayed on the setting line as shown in the window on
the left.)
(2)
Click the execution button.
2) Execution completed with software break
The cursor stops in the position where the software break was set up.
The statement in which the software break was set up is not
executed.
Summary of Contents for Emulation Pod M3062PT3-RPD-E
Page 104: ...M3062PT3 RPD E User s Manual...
