R0E417250MCU00 User
’s Manual
2. Setup
R20UT3587EJ0302 Rev.3.02
Page 37 of 232
Sep.01. 21
2.9.1 Connection to a 100-pin 0.5-mm Pitch Pad Pattern
The following is a procedure of connection to a 100-pin 0.5-mm pitch pad pattern on the user system using the
R0E0100TNPFK00 (not included). For details on the R0E0100TNPFK00, refer to its user’s manual.
(1) Install the NQPACK100SD-ND, which comes with the R0E0100TNPFK00, on the user system.
(2) Connect the YQPACK100SD, which also comes with the R0E0100TNPFK00, to the NQPACK100SD-ND and secure it
with the YQ-GUIDEs.
(3) Connect the R0E0100TNPFK00 to the YQPACK100SD.
(4) Connect CN2 of the R0E0100TNPFK00 to CN2 of the flexible cable.
(5) Connect CN1 of the R0E0100TNPFK00 to CN1 of the flexible cable.
100-pin 0.5-mm pitch
(PLQP0100KB-A) pad pattern
Flash MCU
YQPACK100SD
NQPACK100SD-ND
YQ-GUIDE (x 4)
HQPACK100SD
(not included)
R0E0100TNPFK00
Evaluation with
the actual MCU
Pin 1
User system
(4)
(5)
*
*: These four products are available in one package.
These corners
are not round.
(3)
(1)
(2)
Figure 2.11 Connection to a 100-pin 0.5-mm pitch pad pattern
CAUTION
Notes on Connecting the User System:
⚫
Take care not to attach a converter board in a wrong direction. It may cause a fatal damage to the emulator and
user system.
⚫
The connectors of the R0E0100TNPFK00 are guaranteed for only 50 insertion/removal iterations.
⚫
For purchasing the HQPACK100SD, contact the following:
Tokyo Eletech Corporation
http://www.tetc.co.jp/e_index.htm