manualshive.com logo in svg

Renault TWINGO, Driver'S Handbook Manual

Share
Download
Renault TWINGO Driver'S Handbook Manual Download Page 93

2.19

System unavailable

Warning light 

 

1

 flashes for sev-

eral seconds, then stays on.

TYRE PRESSURE LOSS WARNING 

(4/9)

The sudden loss of pressure in a 

tyre (burst tyre, etc.) cannot be de-

tected by the system.

SYSTEM A (cntd.)

Inflate tyres and reset

The 

 

1

 warning light comes on 

(not flashing).
This indicates that at least one tyre is 

flat or punctured.

In the event of a flat tyre, inflate the re-

levant tyre.

In the event of a puncture, change the 

tyre or consult an authorised dealer.

Check and readjust the pressure of the 

four tyres when cold, and launch the 

reinitialisation of the tyre pressure refe-

rence value.

Warning light 

 

1

 goes out after 

launching the reset of the tyre pressure 

reference value.

System to be checked

Warning light 

 

1

 flashes for sev-

eral seconds, then stays on. This warn-
ing light appears along with the 

©

 

warning light.
They indicate a system fault. Please 

consult an authorised dealer.

1

Summary of Contents for TWINGO





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands