Renault TWINGO Driver'S Handbook Manual Download Page 85

Page: 85 / 228

2.11

Mode ECO

ECO mode is a function which opti-

mises fuel consumption. It acts on all

elements which consume fuel (engine

power, heating and/or air conditioning,

etc).

Activating the function

Press the switch

The warning light



comes on on

the instrument panel to confirm activa-

tion.
While driving, it is possible to leave the

ECO mode temporarily in order to im-

prove engine performance.
To do this, press the accelerator pedal

firmly and fully.
ECO mode is reactivated when you

take pressure off the accelerator pedal.

Disabling the function

Press the switch

The warning light



goes out on

the instrument panel to confirm deac-

tivation.

DRIVING ADVICE, ECO-DRIVING

(2/4)

An overall rating from 0 to 100 is dis-

played to let you assess your eco driv-

ing performance. The higher the score,

the better your eco-driving perform-

ance.

Eco advice is given to help improve

your performance.

With your favourite journeys saved, you

can evaluate your performance.

For more information, please see the

multimedia system instructions.

Summary of Contents for TWINGO





































































































































































































































Search results

Summary of Contents for TWINGO

Reviews:

Brands by name

Popular brands

Renault TWINGO, Driver'S Handbook Manual

Search results

Summary of Contents for TWINGO

Reviews:

Brands by name

Popular brands