manualshive.com logo in svg

Renault TWINGO, Driver'S Handbook Manual

Share
Download
Renault TWINGO Driver'S Handbook Manual Download Page 204

6.2

VEHICLE IDENTIFICATION PLATES

A

B

The information shown on the ve-

hicle identification plate should be 

quoted on all correspondence or 

orders.
The presence and location of the in-

formation depends on the vehicle.

Vehicle identification plate 

A

 

1

 Manufacturer name.

 

2

  EC design number or approval 

number.

 

3

 Identification number.

Depending on the vehicle, this 

information is also given on 

marking

 

B

.

 

4

 MMAC (Maximum permissible 

all-up weight).

 

5

  MTR (Gross Train Weight)

 

6

 MMTA (Maximum Permissible 

Weight) front axle.

 

7

  MMTA rear axle.

 

8

  Reserved for related or additional 

entries.

 

9

  Paint reference (colour code).

A

7

8

9

6

4

3

2

1

5

Summary of Contents for TWINGO





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands