manualshive.com logo in svg

Renault TWINGO, Driver'S Handbook Manual

Share
Download
Renault TWINGO Driver'S Handbook Manual Download Page 129

3.9

Rear screen de-icing/

demisting

Press button 

8

 – the integrated indica-

tor light comes on. This function en-

ables rapid demisting or de-icing of the 

rear screen and de-icing of the door 

mirrors (on equipped vehicles).

To exit this function,

 press button 

8

 

again. Demisting automatically stops.

AUTOMATIC CLIMATE CONTROL 

(3/4)

8

Switching air conditioning on 

or off

In automatic mode, the system switches 

the air conditioning system on or off, 

depending on the climate conditions.
Press button 

5

 to switch off the air 

conditioning; the integrated indicator 

comes on.

5

Vehicles fitted with the 

 

ECO

 

mode 

(switch

 

9

): once activated, 

ECO mode can reduce the perform-

ance of the automatic air condition-

ing. Please refer to the information 

on “Eco-driving” in Section 2.

9

Summary of Contents for TWINGO





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands