3
NU650_12_G3-FRA.qxd 9/12/04 11:22 Page 3.24
TRAFIC - NU 650-12 X83 C:\Documentum\Checkout\NU650-12_T3-ENG.win 17/12/2004 7:21 - page 24
3.24
REAR BENCH SEATS: REMOVING/FITTING
(continued)
Fitting
- position the bench seat over the
front anchorage points;
- push the bench seat until it sits
over the rear anchorage points;
- lower latches 3 and push them
until they lock.
Ensure that the bench seats
are
locked
in
place
correctly
when
refitting
them.
Check that the side seat belts are
locked in their casing correctly.
The rear bench seats must
be placed on their original
anchorage points.
The rear-facing bench seat position
must not be used when the vehicle
is being driven.