Renault KlGER, Vehicle User Manual, Page: 82 / 226

2.4
Starting problems
To avoid damage , do not keep trying
to start the engine (by pushing or towing
the vehicle) without having identified
and corrected the cause of the fault .
If the fault cannot be identified, do not
continue to try and start the engine, but
contact an approved dealer.
The following operating conditions
should be avoided:
– driving for long periods when the low
fuel level warning light is lit.
– using leaded petrol.
– using fuel or lubrication additives
which are not approved.
Operating faults such as:
– faulty ignition, running out of fuel or
disconnected spark plugs resulting
in the engine misfiring or cutting out
when driving.
– loss of power.
may cause overheating, reducing ef-
ficiency which may irreparably
damage vehicle components and
also the vehicle.
If you notice any of the above operating
faults, have the necessary repairs car-
ried out as soon as possible by an ap-
proved dealer.
These faults may be avoided by regu-
larly taking your vehicle to an approved
Dealer at the intervals specified in the
Maintenance Schedule.
Do not park the vehicle or
run the engine in locations
where combustible sub-
stances or materials such
as grass or leaves can come into
contact with the hot exhaust system.
STARTING/STOPPING THE ENGINE - VEHICLE WITH KEY
(2/2)