Renault KlGER, Vehicle User Manual, Page: 126 / 226

3.20
REAR SEATS
Depending on the vehicle, the seatback
A or B may be folded away.
To fold the back A or B
Ensure that the front seats are far
enough forward.
Lower the rear headrests completely
(refer to the information on the “Rear
headrests” in Section 3).
Lift the knob
1 and fold back the seat-
back A or B .
1
When refitting the seat-
back , make sure it is cor-
rectly locked in place.
If seat covers are fitted ,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Check that the rear seat belts are
positioned and operating correctly
each time the rear seat is moved.
Never allow anyone to ride in the
luggage area or on second row seat
when it is in the fold-down posi-
tion. Use of these areas by passen-
gers without proper restraints could
result in serious injury in an accident
or sudden stop.
Properly secure all luggage to help
prevent it from sliding or shifting. Do
not place luggage higher than the
backrest.
When operating the backrest, be
careful not to scratch or damage
seat belts.
B
A
1
Depending on the vehicle, rear seat is
fitted with armrest 2 and cup holder 3 .
Open/close the armrest 2 along the
arrow direction to access the cup
holder 3 .
2
3
Ensure the absence of ob-
jects in the armrest cavity
before closing the armrest 2
to its initial position.
Always keep the arm rest in closed
position when not in use.