Renault KlGER, Vehicle User Manual, Page: 170 / 226

5.26
OPERATING FAULTS
(1/3)
The following advice will enable you to carry out quick, temporary repairs. For safety reasons you should always contact
an approved dealer as soon as possible.
The starter is activated POSSIBLE CAUSES WHAT TO DO
Warning lights dim or fail to come on;
the starter does not run.
Battery terminals disconnected,
oxidised or incorrectly secured.
Retighten them, reconnect them or clean
them if they are oxidised.
Battery discharged or worn. Connect another battery to the faulty bat-
tery. Refer to the information on “Battery:
troubleshooting” in Section 5 or replace the
battery if necessary.
Do not push the vehicle if the steering
column is locked.
The engine is not starting. Starting conditions are not fulfilled. Please refer to the information on “Starting,
stopping the engine” in Section 2.
The steering column remains locked. Steering wheel locked. To unlock, gently move the key and the
steering wheel (refer to the information on
the “Ignition switch” in Section 2).
Traces of condensation in the lights. This is not a fault. Traces of con-
densation are a natural phenom-
enon caused by variations in tem-
perature. The traces will disappear
slowly once the lights are switched
on.