manualshive.com logo in svg

Renault 2016 ESPACE, Handbook

Share
Download
Renault 2016 ESPACE Handbook Download Page 49

1.43

CHILD SEATS: attachment by seat belt 

(1/6)

Visual installation of the five-seater version

RISK OF DEATH OR 

SERIOUS INJURY:

 Before 

installing a child seat on the 

front passenger seat, check 

that the airbag has been deacti-

vated (please refer to “Child safety: 

front passenger airbag deactivation 

and activation” in Section 1).

Using a child safety system 

which is not approved for 

this vehicle will not correctly 

protect the baby or child. 

They risk serious or even fatal injury.

³

  Check the status of the airbag 

before fitting a child seat or allowing a 

passenger to use the seat.

²

Seat not suitable for fitting 

child seats.

Child seat attached using the belt

¬

  Seat which allows a child seat 

with “Universal” approval to be attached 

by a seat belt.

Summary of Contents for 2016 ESPACE































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands