manualshive.com logo in svg

Renault 2016 ESPACE, Handbook

Share
Download
Renault 2016 ESPACE Handbook Download Page 37

1.31

METHODS OF RESTRAINT IN ADDITION TO THE REAR SEAT BELTS

Force limiter

Above a certain severity of impact, this 

mechanism is used to limit the force of 

the belt against the body so that it is at 

an acceptable level.

–  Have the entire restraint 

system checked following 

an accident.

– No operation whatsoever 

is permitted on any part of the 

system (air bags, electronic con-

trol units, wiring) and the system 

components must not be reused 

on any other vehicle, even if iden-

tical.

– Only qualified personnel from 

our Network may work on the air 

bags; otherwise the system may 

trigger accidentally and cause 

injury.

Summary of Contents for 2016 ESPACE































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands