manualshive.com logo in svg

Renault 2016 ESPACE, Handbook

Share
Download
Renault 2016 ESPACE Handbook Download Page 156

2.48

CRUISE CONTROL/SPEED LIMITER: speed limiter function 

(3/3)

Recalling the limit speed

If a speed has been stored, it can be re-

called by pressing switch 

3 

 (R).

Putting the function on 

standby

The speed limiter function is suspended 

when you press switch 

4 

(O). In this 

case, the speed limit remains stored 

and the message “Memorised” accom-

panied by this speed appears on the 

instrument panel.

Switching off the function

The speed limiter function is deactiva-

ted if you press switch 

1

: in this case a 

speed is no longer stored. The orange 
instrument panel warning light 

 goes 

out, confirming that the function is stop-

ped.

When the speed limiter is put on 

standby, pressing side 

a

 (+) on 

switch 

2

 reactivates the function wi-

thout taking into account the stored 

speed: it is the speed at which the 

vehicle is moving that is taken into 

account.

1

2

a 3

4

Summary of Contents for 2016 ESPACE































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands