manualshive.com logo in svg

Renault 2016 ESPACE, Handbook

Share
Download
Renault 2016 ESPACE Handbook Download Page 162

2.54

CRUISE CONTROL/SPEED LIMITER: cruise control function 

(3/4)

Exceeding the cruising speed

The cruising speed may be exceeded 

at any time by depressing the accelera-

tor pedal. While overtaking, the cruis-

ing speed flashes red on the instrument 

panel.
Then, release the accelerator: after a 

few seconds, the vehicle will automati-

cally return to its set cruising speed.

Cruising speed cannot be 

maintained

If driving up or down a steep gradi-

ent, the system is unable to maintain 

the cruising speed: the stored speed is 

flashes red on the instrument panel to 

inform you of this situation.

Adjusting the cruising speed

The cruising speed can be changed by 

pressing the switch 

2 

 repeatedly:

– side 

a

 (+) to increase the speed;

– side 

b

 (-) to reduce the speed.

The cruise control function 

is in no way linked to the 

braking system.

2

a

b

Summary of Contents for 2016 ESPACE































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands