SECTION 2
INSTALLING PRINTER
4
Connecting Printer
Plugging in Printer
Make sure Printer’s Main Power Switch is turned OFF.
1.
Connect one end of power cord to rear
receptacle on Printer.
2.
Plug other end into a 115-220 Volt AC,
50/60 Hz. grounded outlet.
CAUTION
DO NOT USE ADAPTER PLUGS OR
EXTENSION CORDS TO CONNECT
PRINTER TO WALL OUTLET.
DO NOT USE WITH OUTLETS
CONTROLLED BY WALL SWITCHES.
DO NOT USE WITH OUTLETS THAT
SHARE SAME CIRCUIT WITH LARGE
ELECTRICAL MACHINES
OR APPLIANCES.
Connecting to Computer
USB Port:
Plug USB cable into USB connector.
Cable used to connect Printer to computer must
not exceed 6 feet long.
Summary of Contents for AS-150
Page 1: ...AS 150 PRINTER SERVICE MANUAL Rev 10 14 15...
Page 58: ......
Page 59: ...Copyright 2015 Neopost USA...