REMS Lumen 10000, Instruction Manual, Page: 16 / 240

eng
● Only connect the power tool of protection class I to a socket/extension lead with a functioning PE
conductor. There is a danger of electric shock.
● Do not aim the light beam of the LED fl ood lamp directly at persons or animals and do not gaze directly
into the light beam of the LED fl ood lamp even from a great distance. There is a danger of blinding.
● Do not work with the LED fl ood lamp in an explosive environment. Electric sparks can ignite dust and vapours.
●
Do not misuse the connecting cable for carrying the LED fl ood lamp or for pulling the cable out of the
socket. Keep the connecting cable away from heat, oil, sharp edges or moving parts. Damaged or knotted
connecting cables increase the risk of electric shock. The connecting cable cannot be changed.
● Keep the LED fl ood lamp away from rain and wet. Penetration of water into the electrical device increases
the risk of electric shock.
● Keep all electrical connections dry and clear from the fl oor. These safety precautions reduce the risk of
electric shock.
● Do not speed up the cooling process of the LED fl ood lamp by using water. Penetration of water into the
electrical device increases the risk of electric shock.
● The plug of the LED fl ood lamp must fi t into the socket. The plug must not be modifi ed in any way.
Unmodifi ed plugs and matching sockets reduce the risk of an electric shock.
● Pull out the mains plug or remove the battery before cleaning, servicing or putting away the LED fl ood
lamp. This safety precaution prevents unintentional starting of the LED fl ood lamp.
● Children and persons who, due to their physical, sensory or mental abilities or lack of experience and
knowledge are unable to operate the power tool safely may not use this power tool without supervision
or instruction by a responsible person. Otherwise there is a risk of operating errors and injuries.
●
Keep the LED fl ood lamp the permissible minimum distance of ≥ 1 m away from all illuminated surfaces
and objects. The illuminated objects can overheat below this distance.
●
Do not cover the lamp head whilst the LED fl ood lamp is switched on. Covering will cause the surface
of the LED fl ood lamp to heat up excessively. The LED fl ood l-amp could otherwise overheat and no longer
function properly. There is a risk of injury and fi re.
● Switch off the LED fl ood lamp when you are not using it. Never leave the LED fl ood lamp switched on unat-
tended. Unattended electrical devices can cause hazards which could lead to material damages and/or personal injury.
● Do not use the LED fl ood lamp if it is damaged. There is a danger of accident.
●
Do not use the LED fl ood lamp on public roads. The LED fl ood lamp is not licensed for use on public roads.
● Only use original accessories.
Explanation of symbols
WARNING WARNING
Danger with a medium degree of risk which could result in death or severe injury (irreversible)
if not heeded.
NOTICE NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Electrical device complies with protection class I
Electrical device complies with protection class II
Short-circuit-proof safety transformer (SCPST)
Not suitable for using outdoors
Environmental friendly disposal
1,0 m
Minimum distance from illuminated surfaces (in m)
CE conformity mark
EAC conformity mark
16