21
Adding Devices to All Control
Step
Setup Key
LED Indication Status
1
Press
in Advance
Setup
•
The
“
OK
＂
light turns
on
2
Press and hold the key
for 2 seconds which you
want to add to the front
top side
Example:
i)
Press
key to add
to all-on function,
ii)
Press
key to add
to all-off function,
iii)
Press and hold
keys
simultaneously for 2
seconds to add to
both all-on and all-off
function.
•
“
LED_B
＂
flashes
slowly
3
Press the program button
on the target device
•
“
LED_B
＂
turns off
•
“
OK
＂
LED flashes
once then turns off
•
Adding Device from All
Control successfully
Note1: The factory default setting for Z-URC
TM
550US is to be
included in All-On and All-Off control. The above section should only
be needed if the device has been deleted from All Control.
