10
Note2: XpressZetup
TM
cannot support “Multi-Channel Device”, please
refer to [Adding Device to the Network] and [Adding Device/End-point
to a group] for normal setup procedure.
Removing Device from a Group
Step
Setup Key
LED Indication Status
1
Press
in
XpressZetup
TM
area
•
“
OK
＂
LED on
•
“
LED_A
＂
flashes
rapidly
2
Select a group number
from 1 to 16 (1-8 or
1-8)
•
“
LED_A
＂
off
•
“
LED_B
＂
flashes
rapidly
3
Press the program button
on the target device
•
“
OK
＂
LED flashes once
then turns off
•
Device been removed from
the Group successfully
Note1: If the ERROR LED turns on or flashes, meaning the setup
process is failed. Please redo the process.
Note2: XpressZetup
TM
cannot support “Multi-Channel Device”, please
refer to [Removing Device/End-point from a group] for normal setup
procedure.
Note3: This process will only remove the target device from its
assigned group but will not exclude it from the network.
Removing all Devices from a Group
Step
Setup Key
LED Indication Status
1
Press and hold
in XpressZetup
TM
area
•
“
OK
＂
LED on
•
“
LED_A
＂
flashes
rapidly
2
Select a group number
from 1 to 16 (1-8 or
1-8)
•
“
LED_A
＂
off
•
“
LED_B
＂
flashes
rapidly
•
“
OK
＂
LED flashes once
then turns off
•
Device been deleted from
the Group successfully
Note1: If the ERROR LED turns on or flashes, meaning the setup
process is failed. Please redo the process.
