background image

 

 

WIRELESS INFORMATION 

Wireless range: 

This device has an open air line of sight transmission distance of 100 
feet which complies with the Z-Wave standards. Performance can vary 
depending on the amount of objects in between Z-Wave devices such 
as walls and furniture. Every Z-Wave device set up in your house will 
act as a signal repeater allowing devices to talk to each other and find 
alternate routes in the case of a reception dead spot. 

Radio frequency limitations: 
1.

 

Each wall or object (i.e.: refrigerator, bookshelf, large TV, etc) can 
reduce the maximum range of 65 feet by up to 25 to 30%. 

2.

 

Plasterboard and wooden walls block less of the radio signal then 
concrete, brick or tile walls which will have more of an effect on 
signal strength. 

3.

 

Wall mounted Z-Wave devices will also suffer a loss of range as 
they are housed in metal junction boxes which could reduce the 
range by up to 25 to 30%. 

  

 
TECHNICAL SPECIFICATIONS 

 

Model no. 

BW8370US (ZXT-300US) 

Model no. 

BW8370EU (ZXT-300EU) 

RF Frequency 

908.4MHz (US); ZXT-300US 

RF Frequency 

868.4MHz (EU); ZXT-300EU 

IR Frequency 

Up to 455kHz 

IR Learning 

Max 100 commands 

Max. Range 

up to 100ft outdoor line of sight, in 
unobstructed environment 

Power 

DC 5V 100mA 

Humidity 10~85%, 

non-condensing 

Dimension (LxWxT) 

139 x 75 x 28.5 mm 

Weight  

90g 

 

Control and Support Command Class 

 

 ZXT-300 

Item Command 

Class 

Control Support

COMMAND_CLASS_CONFIGURATION No 

Yes 

COMMAND_CLASS_CONFIGURATION_V2 No 

Yes 

COMMAND_CLASS_VERSION No 

Yes 

Summary of Contents for Z-Extender ZXT-300









Reviews: