7
4
COMMAND_CLASS_MANUFACTURER_SPECIFIC No
Yes
5
COMMAND_CLASS_SIMPLE_AV_CONTROL, No
Yes
6
Multi Channel Command Class, version 2
No
Yes
Z-Wave protocol stack revision: Ver. 5.02 patch 3
CHECKING THE ACCESSORIES
After opening the cover of the packing box, check that the following
accessories are included.
•
ZXT-300: Z-Wave-to-IR Extender
•
Power adaptor: 100~240Vac input, 5Vdc 1000mA
(for
ZXT-300)
•
IR Emitting Cable: 3.5mm Mono plug cable x 3pcs
(for
ZXT-300)
•
Quick Reference Guide
•
Code List
FCC NOTICE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
