POWER OUT
TO THROTTLE
& ACCESSORIES.
FUSES
One Orange Polyswitch mean a 3 amp version
Two orange Polyswitches means a 6 amp version.
WIRING THE COBRA-260 ESC
by FOSWORKS.
THRO 1
2
DIRECTION 3
4
5
6
B
A
T/BIND
Motor out +
Motor out -
Ne
g
a
tiv
e -
P
ow
er IN
. +
COBRA-260
PAY PARTICULAR ATTENTION TO WIRING THE DIRECTIONAL LIGHTS.
RED
BLACK
LED
POWER OUT
TO THROTTLE
& ACCESSORIES.
RED
BLACK
BATTERY
CONNECTION
FUSES
One Orange Polyswitch mean a 3 amp version
Two orange Polyswitches means a 6 amp version.
OFF - ON
White
Front LED
The LED’s require current limiting
resistors be fitted in line.
Rear LED
BLUE 5 volt wire goes to long legs of LED’s
Yellow
HOW TO CONNECT BASIC POWER & LIGHTS.
R
ear
F
ront
0v -
Ba
tt +
Match light bulbs with
the traction battery voltage.
Rear Bulb
White
Red +
Front Bulb
WHITE & YELLOW WIRES
GO TO FRONT & REAR ON THE # 260
WHITE & YELLOW WIRES
GO TO FRONT & REAR ON THE # 260
RED WIRE
GOES TO B
470R
470R
When adding other features such as triggering sound systems, information and wiring examples will be
provided with the add on’s chosen.
©
©
Use the lighting outputs to control a
# RELAY-1v3
for easy wiring of USAT and LGB locos.
©
©
Use the simple
# PnP-BATT
kit for Aristo Craft and Bachmann locos fitted wth PnP sockets.
A suitable fuse must be used for system protection. A 5 amp fast blow fuse should be used for most locos.
©
RCS installation kits are fitted with Polyswitch solid state auto reset fuses.
Do not exceed 7 amps without checking with us.
# COBRA-260
for use up to 50 watts.
JST connectors are also available.
SIDE VIEW OF # AB-EM RX.
SERVO PLUG
YELLOW/WHITE SIGNAL
BLACK (NEGATIVE)
RED (POSITIVE)
PAY PARTICULAR ATTENTION TO WIRING
THE ESC DIRECTIONAL LIGHTS.
SERVO PLUG
SIDE VIEW OF # AB-TM RX
YELLOW/WHITE/ORANGE (SIGNAL)
BLACK (NEGATIVE)
RED (POSITIVE)
Yellow
AB-TM
6ch RX v2.
TOP
Three wire cable. Ensure plugs are correctly located.
wire towards top - inwards of RX.
Orange/White
Dual 20cm
Diversity Antenna
s
