WIRING THE OMEGA-10 ESC
by FOSWORKS.
SIDE VIEW OF # AB-EM RX.
SERVO PLUG
YELLOW/WHITE SIGNAL
BLACK (NEGATIVE)
RED (POSITIVE)
Motor out +
Motor out -
Ne
g
a
tiv
e -
P
ow
er IN
. +
PAY PARTICULAR ATTENTION TO WIRING
THE ESC DIRECTIONAL LIGHTS.
RED
BLACK
LED
POWER OUT
TO THROTTLE
& ACCESSORIES.
RED
BLACK
BATTERY
CONNECTION
FUSES
One Orange Polyswitch mean a 3 amp version
Two orange Polyswitches means a 6 amp version.
OFF - ON
White
Front LED
The LED’s require current limiting
resistors be fitted in line.
Rear LED
BLUE BATTERY voltage wire goes to long legs of LED’s
Yellow
HOW TO CONNECT BASIC POWER & LIGHTS.
Match light bulbs with
the traction battery voltage.
Rear Bulb
Yellow
White
Red +
Front Bulb
WHITE & YELLOW WIRES
GO TO FRONT & REAR ON THE ESC
RED WIRE
GOES TO B
OMEG
A-10
When adding other features such as triggering sound systems, information and wiring examples will be
provided with the add on’s chosen.
©
©
Use the lighting outputs to control a
# RELAY-1v3
for easy wiring of USAT and LGB locos.
©
©
Use the simple
# PnP-BATT
kit for Aristo Craft and Bachmann locos fitted wth PnP sockets.
A suitable fuse must be used for system protection. A 5 amp fast blow fuse should be used for most locos.
©
RCS installation kits are fitted with Polyswitch solid state auto reset fuses.
Do not exceed 7 amps without checking with us.
# OMEGA-10
for use up to 50 watts.
JST connectors are also available.
470R
470R
THRO 1
2
DIRECTION 3
4
5
6
B
A
T/BIND
SERVO LEADS FROM ESC
THREE WIRE W/WHITE TRACE SETS DIRECTION.
SINGLE WHITE WIRE CONTROLS SPEED.
R
ear
F
ront
0v -
Ba
tt +
SERVO PLUG
SIDE VIEW OF # AB-TM RX
YELLOW/WHITE/ORANGE (SIGNAL)
BLACK (NEGATIVE)
RED (POSITIVE)
AB-TM
6ch RX v2.
TOP
Three wire cable. Ensure plugs are correctly located.
wire towards top - inwards of RX.
Orange/White
Dual 20cm
Diversity Antennas
