background image

The fan speed can be adjusted with this button. A selection can be made 
between low, medium, high and automatic fan speed.

FAN Button

FAN

In ventilation mode, the air in the room is only circulated.  

The room temperature cannot be changed in this mode.  

The cooling or heating operation is not activated.

AIR CIRCULATION Mode

AIR CIRCULATION

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Turbo

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Turbo

MODE

Hr.

ON            TIMER

Hr.

Off            TIMER

Turbo

SET          TEMP

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

FAN

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

FAN

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

FAN

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

FAN

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

This button activates a programming function, which causes the target 

temperature in cooling mode to increase after one hour by 1°C and after 

two hours by 2 °C. In heating mode, the target temperature is decreased 

after one hour by 1 °C and after 2 hours by 2 °C.  

The display on the indoor unit goes out.  
The TURBO function is used to activate the maximum fan speed

SLEEP/ 

TURBO

SLEEP/TURBO Button

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

SLEEP/ 

TURBO

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

SLEEP/ 

TURBO

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

deactivated

deactivated

The oscillating function of the air discharge fins can be adjusted with 

this button. The air distribution in the room is improved with the swing 

function. In order to adjust the aim of the air discharge fins to a particular 

direction, the AIR DIRECTION button must be pressed briefly. In order to 

activate the automatic swing function, the AIR DIRECTION button must 

be pressed for longer than 2 seconds.

SWING and AIR DIRECTION Buttons

SWING

SWING

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

Hr.

ON            TIMER

Hr.

Off            TIMER

SET          TEMP

Auto

Turbo

deactivated

13

Summary of Contents for MXV 200





























Reviews: