Important!
Check that the condensate hose is cor-
rectly laid. In cooling mode, the conden-
sate which is produced is evaporated in
the unit and fed to the outside through
the exhaust air duct. This is, however,
only possible when the usable limits are
observed. In the event of the air humidity
being raised and in heating and auto-
matic modes, the unit cannot or cannot
completely evaporate the condensate
which is produced. In this case, the water
is drained through the insulated conden-
sate hose. It is not recommended to start
the unit up without the condensate hose
being installed. If the unit is to be used
without a separate installed condensate
drainage, you must ensure that the con-
densate hose under the unit is closed.
Otherwise, water leakage and possible
water damage is possible!
15.
Plug in the electrical supply. Ensure that
there is a 16A fuse fitted.
16.
The unit is now ready for use.
Scope of delivery
4
5
2
7
6
3
1
Fig. 10: Scope of delivery
1: IR remote control (1 pc.)
2: Internal spigot (2 pcs.)
3: Outside cover (2 pcs.)
4: Plastic pipe (1 pc.)
5: Mounting template (1 pc.)
6: Screws and wall plugs (15 pcs.)
7: Fastening springs (2 pcs.)
17
