Operation
The unit can be easily operated
with the room temperature
controller available as an accessory
or a controller to be provided
by the customer. It is also possible
to activate the system using
a building management system.
Use the separate operating manuals
for this purpose.
The controller is connected to one
or more units by a cable. If a group
controller is used the maximum
current load must be observed.
Room temperature controller
Wall mounting
Individual control
Controller
provided by
the customer
CBCS
Room temperature controller
Installation in the unit
Shutdown
Temporary shutdown
1.
Let the unit run for 2 to
3 hours in circulation mode,
or in cooling mode at maximum
temperature, to extract any
residual humidity from the unit.
2. Shut down the system using
the controller.
3. Switch off the power supply
to the unit.
4. Check the unit for visible
signs of damage and clean
it as described in the "Care and
maintenance" chapter.
Permanent shutdown
Ensure that units and components
are disposed of in accordance with
local regulations, e.g. through
authorised disposal and recycling
specialists or at collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms
in your area.
Help by reducing energy
usage in stand-by mode!
If the unit, the system
or the components are not
being used, we recommend
disconnecting the power
supply. Our recommendation
does not apply to safety
relevant components.
TIP
7
Group activation
Switching relay
Controller
provided by
the customer
CBCS
Precision room temperature controller
Wall mounting
