Horizontal mounting
The condensate drainage line
can be connected directly
to the condensate tray. If a valve
assembly is used, the condensate
is conveyed to the unit's pan and
is drained from there.
The condensate drainage connection
of the condensate tray which is not
used must be permanently sealed
(a cap or similar).
CAUTION
Condensate drainage connection
Condensate drainage connection
Condensate drainage connection
Vertical mounting
Horizontal mounting
KWK Horizontal mounting
Electrical wiring
All electrical installation work
is to be performed by specialist
companies. Disconnect the power
supply when connecting
the electrical terminals.
CAUTION
■
We recommend installing
a master / repair switch
provided by the customer close
to the indoor unit.
■
The power supply is made
at the indoor unit, a control line
to the chiller is not necessary.
■
If a condensate pump, which
is available as an accessory,
is used in conjunction with
the unit, the pump switch-off
contact switches off the power
supply or the valve if necessary.
■
The terminal block for making
the connections and the plug
are located behind the unit's
cover on the right side
of the unit.
Possible accessories
Room temperature controller
■
The room temperature
controller operates the unit.
The controller can be wall-
mounted or installed in the unit,
as required. Follow the separate
Installation Instructions.
Switch relay for 4 units, if appropriate
■
If several units are to be controlled
together in a group, a switch relay
is necessary if a room temperature
controller is used.
Follow the separate Installation
Instructions.
Heating element if necessary
■
The heating element allows
the rooms to be heated
electrically via the controller.
Follow the separate Installation
Instructions.
17
