REMKO KF 2, Operation Technology

Page: 7 / 20

7
ON/OFF
Time
Press the POWER key to turn the unit on or off. Operation is
indicated by the green LED. The display shows the values and settings
programmed before switching off. During initial commissioning,
the time display flashes. The time should be set first to guarantee
error-free operation of the unit.
After connecting the supply line, the time display flashes. The desired
time can now be set with the TIME key. To fix the time, press the
CLOCK key. AM or PM no longer blinks. To change the time, press
the CLOCK key, AM or PM flashes, the time can now be changed
with the TIME key. To fix the time, press the CLOCK key again.
AM or PM no longer blinks.
The ENTER key must be pressed after all settings to confirm them!
If the ENTER key is not pressed, the regulation automatically returns to
the previous setting values after approx. 8 seconds.
ENTER key
Increase the target temperature
Decrease the target temperature
The TEMP key is used to set the desired target temperature
in 1°C steps. This setting is not possible in recirculation mode.
After setting, always press the ENTER key to confirm the settings!
Temperature