1.6 Safety instructions for the
operator
The operational safety of the units and compo-
nents is only assured providing they are used as
intended and in a fully assembled state.
This unit can be used by children above the age of
8, as well as by people with impaired physical,
sensory or mental capabilities or a lack of experi-
ence and knowledge if they are supervised or have
received instruction in the safe operation of the
unit, and if they understand the associated poten-
tial hazards. Children must never play with the unit.
Cleaning and user maintenance must not be car-
ried out by unsupervised children.
n
The units and components may only be set up,
installed and maintained by qualified per-
sonnel.
n
If the mains power supply line of this unit is
damaged, this must be replaced by the manu-
facturer or their customer services department
or a similarly qualified person in order to avoid
any hazard.
n
Do not operate units or components with
obvious defects or signs of damage.
n
The units may not be installed or operated in
explosive environments.
n
The units must not be installed or operated in
atmospheres containing oil, sulphur, chlorine or
salt.
n
The units must be installed upright and in a
stable position.
n
The units and components must not be
exposed to any mechanical load, extreme
levels of humidity or extreme temperatures.
n
All housing parts and unit openings, e.g. air
inlets and outlets, must be free from foreign
objects. An unobstructed air inlet and air outlet
must be guaranteed at all times.
n
The units must not be covered during opera-
tion.
n
Never insert foreign objects into the units.
n
The units must not be transported while they
are running.
NOTICE!
Extensions to the connection cable must only
be conducted by authorised specialist electri-
cians, taking into consideration the unit power
consumption, cable length and local use.
DANGER!
Work on the electrical equipment must only be
conducted by an authorised specialist!
1.7 Safety notes for
installation, maintenance and
inspection work
n
Appropriate hazard prevention measures must
be taken to prevent risks to people when per-
forming installation, repair, maintenance or
cleaning work on the units.
n
The setup, connection and operation of the
units and its components must be undertaken
in accordance with the usage and operating
conditions stipulated in this manual and comply
with all applicable regional regulations.
n
If the mains power supply line of this unit is
damaged, this must be replaced by the manu-
facturer or their customer services department
or a similarly qualified person in order to avoid
any hazard.
n
The units must be installed upright and in a
stable position.
n
The units must not be exposed to direct jets of
water, e.g. pressure washers etc.
n
Safety devices may not be modified or
bypassed.
n
The units and components may only be set up,
installed and maintained by qualified per-
sonnel.
n
Do not operate units or components with
obvious defects or signs of damage.
n
The units may not be installed or operated in
explosive environments.
n
The units must not be installed or operated in
atmospheres containing oil, sulphur, chlorine or
salt.
n
The units and components must not be
exposed to any mechanical load, extreme
levels of humidity or extreme temperatures.
n
All housing parts and unit openings, e.g. air
inlets and outlets, must be free from foreign
objects. An unobstructed air inlet and air outlet
must be guaranteed at all times.
n
All electrical cables on the outside of the units
must be protected against damage (e.g. by ani-
mals etc.).
1.8 Unauthorised modification
and changes
Modifications or changes to units and components
are not permitted and may cause malfunctions.
Safety devices may not be modified or bypassed.
Original replacement parts and accessories
authorised by the manufactured ensure safety. The
use of other parts may invalidate liability for
resulting consequences.
REMKO
5
