2.
Pull the nylon pre-filter out of the unit by the
tabs. Pay attention to the retaining tabs on
the sides and on the lower edge
3.
Pull the filter foam mat attached with Velcro
strips off the activated carbon granulate cas-
sette.
4.
Pull the granular activated carbon cartridge
out of the unit by the tab.
5.
Pull the HEPA filter out of the unit by the tab.
To insert the filters into the unit, proceed in reverse
order. Insert the filters so that the tabs are acces-
sible and the numbering (except the filter foam
mat) remains visible.
REMKO LRM series
18
