REMKO ELT 40, Assembly And Operating Instructions Manual

Page: 16 / 20

9.2 Spare parts list
No. Designation ELT 40
1 Exterior cladding 1107971
2 Crane eye 1102554
3 Transport handle 1107972
4 Front wall 1107973
5 Outlet nozzle 1107974
6 Heating resistor 1107975
7 Axle 1107976
8 Wheel 260/60-240 1101621
9 20 mm locking ring 1101622
10 Hubcap 1101623
11 Unit base 1107977
12 Support, rear 1107978
13 Motor 1108611
14 V-belt pulley, fan 1102795
15 Clamping bush, fan 1102795
16 V-belt 1102698
17 Clamping bush, motor 1102794
18 V-belt pulley, motor 1102794
19 Back wall 1107979
20 Protective intake grille, rear 1107980
21 Motor plate 1107981
22 Radial fan 1108610
23 Connection terminal strip 1107982
24 Strain relief 1107983
25 Connection cable with plug 1107893
27 Safety thermostat with probe 1101197
28 Strapping plug 1101019
29 Thermostat socket, complete 1101018
30 Control fuse, complete with holder 1107984
31 Emergency stop switch 1107985
32 Unlocking unit for motor overload protection switch 1107986
33 Operating switch, cpl. 1107993
34 Auxiliary contact 1-2 (NC=normally closed) 1107898
35 Auxiliary contact 3-4 (NO=normally open) 1107899
REMKO ELT series
16