background image

1.9  Intended use

The units are designed exclusively for heating and

ventilation purposes in industrial or commercial use

(no living space heating in private use) on the

basis of their structural design and equipment. The

units must only be operated by appropriately

instructed personnel.

Any different or additional use is a non-intended

use. The manufacturer/supplier assumes no lia-

bility for damages arising from a non-intended use.

The user bears the sole risk in such cases.

Intended use also includes working in accordance

with the operating and installation instructions and

complying with the maintenance requirements.

The threshold values specified in the technical

data must not be exceeded.

1.10  Warranty

For warranty claims to be considered, it is essential

that the ordering party or its representative com-

plete and return the "certificate of warranty" to

REMKO GmbH & Co. KG at the time when the

units are purchased and commissioned.

The warranty conditions are detailed in the "Gen-

eral business and delivery conditions". Further-

more, only the parties to a contract can conclude

special agreements beyond these conditions. In

this case, contact your contractual partner in the

first instance.

1.11  Transport and packaging

The devices are supplied in a sturdy shipping con-

tainer. Please check the equipment immediately

upon delivery and note any damage or missing

parts on the delivery and inform the shipper and

your contractual partner. For later complaints can

not be guaranteed.

 WARNING!

Plastic films and bags etc. are dangerous

toys for children!

Why:

- Leave packaging material are not around.

- Packaging material may not be accessible to

children!

1.12  Environmental protection

and recycling

Disposal of packaging

All products are packed for transport in environ-

mentally friendly materials. Make a valuable contri-

bution to reducing waste and sustaining raw mate-

rials. Only dispose of packaging at approved

collection points.

Disposal of equipment and components

Only recyclable materials are used in the manufac-

ture of the devices and components. Help protect

the environment by ensuring that the devices or

components (for example batteries) are not dis-

posed in household waste, but only in accordance

with local regulations and in an environmentally

safe manner, e.g. using certified firms and recy-

cling specialists or at collection points.

 

 

 

REMKO ELT series

 

 

6

Summary of Contents for ELT 40





















Reviews: