REMKO ATK 50-S, Operation,Technology,Spare Parts, Page: 7 / 16

7
NOTE
The unit may only be loaded
when cooled.
Exhaust gas routing Transport
It is also possible to operate
the units outdoors or in open
spaces without exhaust routing.
We always recommend fitting
an exhaust gas duct with a rain
hood on top in order to rule out
the ingress of rain water and dirt.
■
The minimum distance of 0.6 m
to combustible parts must be
met
NOTE
There must be no counter pressure
arising from incorrect installation
of the exhaust gas routing under
any circumstances.
Notes for implementing the 1st.
BImSchV
Units that are not expected to
be operated for longer than
3 months in the same location
are not subject to any approvals
or monitoring as per the 1st.
BImSchV.
The units can be transport in their
normal operating position or in a
vertical position to save space.
Proceed as follows for a vertical
position:
1. Secure the exhaust gas duct
in its designated position with
the belts.
2. Check the level of the fuel tank.
The maximum capacity of 45
litres must not be exceeded (see
sticker on side).
3. Tip the unit towards the outlet
side and align on the 4 rubber
buffers.
4. In this position, the unit can only
be secured to the surrounding
tubular frame for transport using
suitable attachment material.