4
C
GETTING STARTED
It is recommended that you use your new shaver daily for up to four weeks to
allow time for your beard and skin to become accustomed to the new shaving
system.
To confirm the model number of your shaver, please refer to the packaging or
the open the trimmer where the model is printed in the upper right corner of the
rating information.
The shaver automatically adjusts to a mains voltage between 100V and
240V.
F
INSTRUCTIONS FOR USE
,
SHAVING
,
Note: PR1230 shaver is for corded use only.
1
Connect the shaver to the adaptor and then to the mains.
2
Slide the power switch to turn on.
3
Stretch the skin with your free hand so the hairs stand upright.
4
Only apply light pressure on the shaving head while shaving (pressing too
hard can damage the heads and make them vulnerable to breakage).
5
Use short, circular strokes.
,
TRIMMING
6
Slide the trimmer button to release the detail trimmer.
7
Hold the trimmer at a right angle to your skin.
8
Place the trimmer at desired trim line for a quick, easy, professional trim.
9
To retract the trimmer, push down until it locks into position.
E
Tips for best results
•
Ensure your skin is dry. Always hold the shaver at right angles to the skin so
that all three heads are touching the skin with equal pressure.
•
Use moderate to slow stroking movements. The use of short circular
motions in stubborn areas may obtain a closer shave, especially along the
neck and chin line.
•
DO NOT press hard against the skin in order to avoid damage to the rotary
heads.
Summary of Contents for PR1230
Page 7: ...7...
