![background image](http://html1.mh-extra.com/html/remington/pg6024au/pg6024au_quick-start-manual_1437482008.webp)
8
Step 4: Top of the head
1.
Adjust the comb to the longer length settings (up to 16 mm) then cut
the hair on top of the head against the direction in which the hair
normally grows.
2.
Always work from the back of the head.
Beard / Moustache: 32mm Trimmer Head With Adjustable Comb
(2-16mm)
1.
Use a small comb to straighten hairs for trimming.
2.
Fit the 30mm trimmer head and adjustable comb.
3.
Set the adjustable comb to the desired length.
4.
Start trimming under the chin following the line of the jaw.
5.
Work upwards towards the ear and upper beard line.
Contour Edging and Close Hair Cutting: 32mm Trimmer Head
1.
Hold the groomer with the cutting blade (teeth) facing you and at 90
degrees to the skin.
2.
Start with the edge of the beard/moustache line and, with the blade
resting lightly against the skin, use slow controlled movements to
create contoured lines.
Beard Line: Arc Detail Trimmer Head
1.
Hold the groomer with either the 32mm trimmer or arc detail trimmer
blade facing you.
2.
Start with the edge of the beard line and with the cutting blades
resting lightly against your skin. Use downward motions towards the
edge of the beard line to trim the beard line to the desired shape in the
facial areas and around the neck.
Sideburns: Arc Detail Trimmer Head
1.
Comb sideburns following the direction of your hair growth.
2.
Hold the groomer vertically with either the 32mm trimmer or arc detail
trimmer head facing you.
3.
Trim sideburns using a downward motion. After trimming, lightly go
over the trimmed areas with the mini foil shaver head to remove any
short hairs remaining and to get a smooth clean finish.
Mini Foil Shaver Head
•
Use the Mini Foil Shaver head to clean-up detailed areas. For best
results, avoid holding at an angle.