CLEANING & MAINTENANCE
Both your detail trimmer and nose & ear trimmer are designed to give you
years of comfortable use. To ensure that you get optimal performance from
your trimmers, follow these simple cleaning and lubricating tips:
•
After each use, brush or blow accumulated hair from the cutting units.
Rinsing Your Trimmers:
•
The heads of your trimmers are washable and can be rinsed with cool
or warm water. Simply twist the attachment head 1cm anticlockwise
(to the left), remove the head and rinse them under the tap
Caution:
Do not use hot water. Do not allow water into the body of the
handpiece.
•
Afterward, shake excess water from the cutter head. Be sure to be
careful when handling the nose trimmer blades as they are sharp.
•
Replace the head in the same position as it was removed, turning it
1cm clockwise (to the right) until it locks into place.
Lubricating The Cutters:
•
After rinsing the attachment heads, apply a drop or two of lubricating
oil or sewing machine oil to the cutting teeth &/or blades (nose & ear
trimmer).
•
Don’t apply too much oil, or it may spray.
•
Finally, point the trimmer down and away from you, and turn it on. This
spreads the oil evenly and expels any excess.
6
This product is not suitable to use in the bath or shower.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
