![background image](http://html.mh-extra.com/html/remington/microscreen-100/microscreen-100_use-and-care-manual_1437413007.webp)
To Attach Trimming Guides
1.
Select the trimming guide that
matches the length you want
the hair to be after the cut. The
trimming guides are numbered
and marked with 1/8” (3mm),
1/4” (6mm), 3/8” (9mm), 1/2”
(12mm), 5/8”(16mm), 3/4”(18mm),
7/8”(22mm), and 1”(25mm). See
preceding chart to determine
which combs your model contains.
2.
While the clipper is off, hold the
trimming guide with the teeth up.
Slide the trimming guide onto the
blades until it locks into place.
7
How to Use
Before Cutting Hair
1.
Make sure your hair clipper is oiled
(if required) and runnning smoothly,
with a slight vibration.
2.
Place a cape around the neck of
the person whose hair is being
trimmed or cut. (A cape is provided
with model HC-8017B).
3.
This person should be seated so
that the top of their head is at your
eye level.
4.
Comb the hair as it is normally
styled.
5.
Comb out all knots and tangles.
6.
Ensure the hair is dry. Hair clippers
perform best with dry hair, making
it easier to see how much hair is
being cut.
7.
Hold the hair clipper in the palm of
one hand with your thumb resting
firmly on the top of the hair clipper.
This grip provides comfortable
cutting control. Although the hair
clipper may be used with the left
or right hand, using it right-handed
allows you to access the taper
lever more easily.
Summary of Contents for MicroScreen 100
Page 12: ......