7
ATTACHING THE GROOMING ATTACHMENTS
Note: Ensure the groomer is switched off before changing any attachments.
To Attach & Remove the Attachment Heads:
•
To attach any of the attachment heads, slide the selected head onto
the body until it clicks into place.
•
To remove the T-Blade & the Detail Heads, press on the eject symbol
on the back of the head and slide forward. Make sure the blade is
facing away from you.
•
The foil shaver attachment has a release button on the back. To
remove, press then slide off.
Trimming Guides:
Note: Make sure the T-Blade is on the groomer.
•
To attach trimming guides, ensure the trimmer blade is facing away
from you. Hook the trim guide on the front of the trimmer blade and
push down to click into place.
•
To remove, pull the tab on the back of the trim guide upwards and
away from the trimmer blade.
Adjustable Stubble Comb:
•
The stubble comb can be adjusted to give you length settings between
1.5 - 5.0mm by turning the wheel to the desired length.
•
Turn the wheel clockwise for longer length and counterclockwise for
shorter lengths. The wheel has an indicator that points to the length
setting selected.
GROOMING TIPS
Beard / Moustache:
•
Use a small comb to straighten hairs for trimming.
•
When TRIMMING, first select a Trimming Guide and attach to the
T-Blade. If you are trimming for the first time start with the maximum
length. Adjust the trim guide length as desired once you are familiar
with using the groomer.
•
Starting under the chin, follow the jaw line back towards the ear. Trim
in multiple directions to capture all stray hairs.
•
When THINNING or TAPERING, use a small comb to hold beard in
place. In your opposite hand, hold the Groomer with the cutting system
facing outward while slowly moving through the hair.
