4
C
GETTING STARTED
,
BATTERIES
• Your beard trimmer requires 2 ‘AA’ alkaline batteries (first set included). We
recommend that you use VARTA® batteries.
• Turn the appliance off.
• Open the battery compartment by pressing in the ridged areas and pulling
downward.
• Insert batteries so that the (+) and (-) marks on the batteries face the same
marks in the battery compartment.
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the appliance and safely
disposed of.
• If the appliance is to be stored unused for a long period, the batteries should
be removed.
• The supply terminals are not to be short-circuited.
• To remove the batteries, slide open the battery compact cap on the base of
the groomer.
F
INSTRUCTIONS FOR USE
,
BEFORE YOU BEGIN
•
Always comb your beard or moustache with a fine comb before you start
trimming.
,
ADJUSTING THE TRIM LENGTH
•
The trimmer comb can be adjusted to give you 6 different trim lengths.
Comb Position
Cutting Length
1
1.5mm
2
4.5mm
3
7.5mm
4
10.5mm
5
13.5mm
6
16.5mm
