5
• Use the trimmer without any fixed combs for trimming hair close to the skin.
•
This will trim hair to 1mm, holding the clipper so the blades are
perpendicular to the skin will trim hair to 0.4mm.
,
TO THIN AND TAPER THE BEARD/MOUSTACHE
•
Attach the adjustable comb to the trimmer blade and select the desired
length.
•
The setting will appear on the length position indicator. If you are trimming
for the first time start with the maximum trimming length setting.
•
Turn the unit on.
•
Place the flat top of the trimmer comb against the skin.
•
Use motions towards edge of beard/moustache line to trim to desired
locations in facial area and away from beard in neck area.
,
TRIMMING EDGE OF SIDEBURNS
•
Start with edge of sideburn, and with the trimmer blades resting lightly
against your skin, use motions towards edge of sideburn line to trim the
desired locations in facial area.
,
TRIMMING THE NAPE OF YOUR NECK
,
Note: You will need a hand mirror for this operation if performing it alone.
• Remove the fixed combs or adjustable comb from the wide trimmer. Use
your fingers to lift the hair at the base of your head up off the neck.
• Your index finger should be covering the roots of the hairs you are lifting to
prevent accidental removal by the beard trimmer.
•
Using your other hand, hold the trimmer to the base of your neck with the
cutting unit facing up, and move the trimmer up the length of the neck until
it touches your finger covering the hair roots at the base of your head.
•
Be sure to move the unit slowly when performing this operation and to
keep the hair roots at the base of your head out of the way of the trimmer.
C
CARE FOR YOUR TRIMMER
•
Cleaning should be done with a soft brush.
•
Only use a light-grade oil or sewing machine oil on the blades.
•
This trimmer is not washable. Do not rinse under water.
•
Do not submerge in water as damage will occur.
,
TROUBLESHOOTING
•
If the trimmer is not working ensure batteries are not empty and installed
correctly. Ensure blades are not clogged with hair trimmings.
