Remington iLIGHT SP6000FUS, Use And Care Manual

Page: 30 / 56

30
Using Remington iLIGHT Face And Body for Treatment
previously selected and a lower
energy level is desired, continue to
press the ENERGY LEVEL SETTING
BUTTON until the desired lower
energy setting is set. After reaching
Level 5, pressing the ENERGY LEVEL
SETTING BUTTON an additional time
will reset to Energy Level 1.
As with any new skin care product, we
recommend testing REMINGTON iLIGHT
Face and Body on a patch of skin before
your first full treatment or before treating
a new area.
STEP 4: TEST A PATCH OF SKIN
Testing REMINGTON iLIGHT Face and
Body helps you determine the appropri-
ate Energy Level to use the first time you
use the device, or for each new treatment
Energy Level 1 2 3 4 5
Press Energy
Level Setting
Button
Defaults to Level
1 upon start-up.
Energy Level
Selection Display
Lights:
3a
. Upon start-up, the device sets itself
to the lowest energy level (Level 1
above). The device is now ready to
trigger the first flash. (See “Using
the REMINGTON iLIGHT Face and
Body below).
3b
. To change the energy level press the
ENERGY LEVEL SETTING BUTTON
to increase the energy level until
the desired energy level is set (for
example, pressing the ENERGY LEVEL
SETTING BUTTON once will increase
from Level 1 to Level 2; pressing
another time will increase to Level 3).
ENERGY LEVEL INDICATOR LIGHTS
will coincide with the energy level
setting.
3c
. If a higher energy level was
Figure 3