Remington iLIGHT SP6000FUS, Use And Care Manual

Page: 25 / 56

25
Using Remington iLIGHT Face And Body for Treatment
Once you’ve become familiar with
REMINGTON iLIGHT Face and Body and
read all the information on the preced-
ing pages, including the WARNINGS
and PRECAUTIONS, you’re ready to use
REMINGTON iLIGHT Face and Body.
This section explains step-by-step how
to operate REMINGTON iLIGHT Face and
Body. Read this entire section carefully
before you start treatment. Then refer
back to it later as you follow the steps.
The first time you use REMINGTON
iLIGHT Face and Body, you should test it
on a small patch of skin. See steps on
page 30.
In addition, we recommend that you use
REMINGTON iLIGHT Face and Body in
a cooler area where the temperature is
less than 80° F (27° C) to help keep the
device from overheating.
STEP 1: PREPARE SKIN
Before using REMINGTON iLIGHT Face
and Body, prepare the treatment area by
thoroughly Cleaning, Shaving, and Drying
the intended treatment area. It is impor-
tant that you remove any makeup from
the treatment area.
Removing surface hair and cleaning the
skin helps to minimize the sensation
felt from the REMINGTON iLIGHT Face
and Body flashes and allows the energy
to penetrate to the hair root. Because
REMINGTON iLIGHT Face and Body
works below the skin, the device is still
effective even if hairs are not clearly
visible.